• i.pro Mortars Socli
  • i.pro RENOCOLOR

  • Rendering mortar (CR)

  • i.pro RENOCOLOR SOUS ENDUIT is a lime-based mortar for renders, designed for new substrates or hard stone. i.pro RENOCOLOR complies with Standard EN 998-1.

Also for renewal
Sustainable product

Produced according to ISO 14001 Standard

Available in

  • Pack type 30 kg Bag, Big Bag, Sheathed pallet

  • Pallet 30-kg bags / Pallets of 40 bags (1200 kg)

Fields of application

  • Renders
  • Repointing 


i.pro RENOCOLOR shares its properties with natural hydraulic limes:


  • They strengthen in two stages: an initial and faster setting occurs when in contact with water and a second setting occurs with exposure to the air as the lime absorbs CO2
  • Those two combined and gentle settings reduce any risk of shrinkage and protect the substrates against humidity. Breathability is optimum when combined with clay bricks
  • The first stage of i.pro RENOCOLOR setting is around 2 hours in standard conditions. A smooth finish is quicker to make
  • It has a low elasticity modulus
  • It allows buildings to "breathe", and does not trap moisture in the walls
  • i.pro RENOCOLOR re-absorbs the carbon dioxide (CO2emitted by the calcination of the lime, thus partially offsetting the large amount emitted during its manufacture
  • Easy to spray


  • Work between 5°C and 30° C
  • Humidify the wall before application (the evening before)
  • Always remove excess mortar at the bottom of the wall
  • Always take care in excessive weather conditions (rain and sun) and protect the walls
  • Store bags in dry conditions for a maximum of one year after the production date, as specified on the bags
  • Do not make reinforced concrete with i.pro RENOCOLOR
  • Do not add any additives or admixtures
  • Do not apply on the following substrates: gypsum, old walls with salt (use i.tech RINZAFFO and i.tech VENEZIANO) or timber frames (choose i.pro MUR CENTENAIRE)
  • Do not use on frozen or thawing surfaces

Media gallery